Product Description：

This key cutting machine is an automatic tooth opening device developed for iron keys. The machine can process a variety of straight, S-slot, single-sided, double-sided keys. The key machine tool adopts the automatic feeding (selectable vibrating plate), automatic tooth opening and automatic ring-punching processing methods to fully improve the processing efficiency and save manpower. The machine tool can set the opening parameters of the key arbitrarily.

What Do I Need To Be Able To Pick A Simple Lock

1. A basic understanding of how locks work.

2. You can then use one of these three types of picking methods:

A tension wrench used for applying gentle pressure in the "unlocking" direction - i.e. the direction the key would turn while unlocking the lock, and a pick - on the above picture, the top of the left tool - used for lifting the pins one at a time while using the tension wrench.

Raking

A tension wrench, as above, and a rake - in the above image, the bottom of the left tool - used for sliding to the back of the lock and "raking" against the pins while applying of the pressure.

Other methods of picking include "bump keys" and "mechanical pick guns", as well as "snap picks", for these please refer to the appropriate section.

Check information about this cylinder key bitting machine.

Processing Steps：

·Automatic feeding, automatic double sides bitting tooth, automatic ringing, automatic blanking.

Quick Details：

·Processing Material: Iron

·Processing Range: Single side punching tooth key

·Work Efficiency: 10000-11000 / 8 hours (single side)

·Machine Size: 1.6L *1.4W *1.6H (m)

·Machine Weight: 700kg

·Machine Power: 2kw

Machine Configuration:

http://www.jingrui8888.com/