If you are checking China gps battery manufacturer and supplier, or gps battery chinese factory, please feel free to contact M-Batt Electronics, we are always at your service.

Model: 103450-1S1P

Voltage: 3.7V

Capacity: 1800mAh

Discharge current: 0.2C

Working temperature: -20~60℃

Product dimension: 11*35*54mm

Internal resistance: ≤150mΩ

PCM: IC-S8261G2G+MOS-AO8822

Wire type: UL1007/24#

Length: 100mm

Voltage Nominal : 3.7V

Capacity Nominal : 1000mAh

Pack Specification: Electrical specification

Capacity Nominal : 1000mAh (by Standard Charge and Discharge)

Voltage Nominal : 3.7V

Charging Method : CC-CV

Charging Voltage : 4.2V

Charging Current : Standard charge 500mA (0.5C)

Maximum 800mA (0.8C)

Cut-off <50mA (0.05C)

Discharging Current : Standard 200mA (0.2C)

Maximum 800mA (0.8C)

Discharge cutoff voltage : 3.0V

Internal Resistance : < 180mΩ

Operating Temperature : Standard Charge 0 to 45℃

Standard Discharge -20 to 60℃

Storage Temperature : 0 ~ 25℃ ≤ 1 Year

0 ~ 45℃ ≤ 3 Month

0 ~ 60℃ ≤ 1 Month

Storage Humidity : 20~85%RH (not condensed)

Charging and Discharging

1. Do use suitable charger and charge with specified voltage , current and temperature, humidity.

We strongly recommend the smart battery charger.

1. Never attempt reverse charging.

2. Avoid over-charging.

4. Do not discharge the pack under over-discharge voltage.

5. Over-discharging may cause loss of performance, characteristics of the pack function.

6. Mechanical shock protection

7. Otherwise, it may cause shape distortion, leakage, heat generation and/or rupture.

For Safety

1. Do not short-circuit with metal wire, necklace, chains or any conductors.

2. Do not drop the pack from height.

3. Do not twist or bend the pack.

4. Do not disassemble the pack.

5. Do not use the pack when something abnormal is found such as smells,

deformation, discoloration,and so on.

6. When the electrolyte leakage occurs, do not touch the liquid.

7. Do not soak in water or get it wet.

8. Do not have the pack in the hot-temperature (more than 60℃).

9. Do not put the pack into fire.

10. Do not crush/nail the pack.

11. Do not apply solder directly to the pack.

12. Do not charge the pack nearby the fire or under the blazing sun.

13. Do not drive a nail into the pack, strike it by hammer, or tread it.

14. Do not give the pack impact or throw it.

15. Do not use the pack for other equipment.